首頁 > 水質檢測 >  水質分析儀 > 油類檢測儀 > 石油化工專用儀器 > 防爆安全溫度計(Standard Weight Probe) 型號:TP-7/TP7-C(15米)
防爆安全溫度計(Standard Weight Probe) 型號:TP-7/TP7-C(15米)
防爆安全溫度計(Standard Weight Probe) 型號:TP-7/TP7-C(15米)
訂貨號: TA-01426-00
產地: 美國
品牌:
開發編號: N
市場價:
*此產品根據配置不同價格不同
*此價格為參考價格,具體價格以訂單合同為準
    我在現場:
    產品視頻:
  • 銷售工程師 吳經理
    010-84851836-828
    18210223910
    QQ:2355835517
  • 1
  • 產品描述
  • 技術參數
  • 技術文檔
  • 相關產品
  • 明細價格
  • 購買流程
產品描述:

 

TP7-C


最大尺寸:34.3 x 18.4 x 11.4 cm
2節AA堿性電池,壽命大約200小時
電池操作溫度范圍4到130°F,20至54°C
注:如果環境溫度很低或高電池不可能提供充足的電力。

表殼材質:聚丙烯共混材料,不銹鋼和鋁

內置鉑電阻的不銹鋼傳感器外有防靜電電纜套管,芳綸纖維加強了抗切割和耐碎性。
電纜采用碳氟化合物,如FEP、PFA或相似材料作為絕緣材料
溫度:溫度范圍:-40 to +204°C
分辨率:0.1℃,
誤差:±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C

長期精確度漂移不超過 0.05%/年
符合API要求
安全等級:II 2 (1) G Ex ib[ia] IIB T4



The TP7-C employs the proven RTD design that has been used in the TP 7 and TP 8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A polypropylene blend enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.

The new TP 7-C circuit board is an evolutionary step up from our highly accurate, reliable and successful TL1 laboratory thermometer. The Power Button’s primary function powers the instrument for intervals of about 20 minutes since the last button was accessed. The Power Button can also be used to conserve power and clear the memory, or to make adjustment while in calibration mode. A simple menu operation is displayed by holding the Function Button, and alternately functions to allow adjustments in the calibration mode. Arrows on the left side of the display show the direction of the temperature reading and whether stability has been reached. At the user’s discretion stabilized temperatures can be logged at numerous liquid levels for a running average and later displayed for the user’s documenting purposes. But this feature never interferes with simply getting an accurate temperature reading.

To endure the environment and be intrinsically safe, the TP 7-C is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of a polypropylene blend. The probe assembly is constructed using non-stick cable and stainless steel sensor components.

Operational Attributes:

Easily replaceable AA Batteries, provides an estimated *200 hours operation.

Circuit logic automatically indicates low battery condition, automatically shuts off after twenty minutes, shows temperature trend and stabilization, displays error codes for failure determination.

The low power backlight for night operation is photo sensor controlled for convenience and battery conservation.

In nighttime conditions the backlight illuminates the display.

Celsius or Fahrenheit units with C/F indication can be easily selected from the Function Button.

User Manual explains intuitive calibration procedure that can be done through the external faceplate buttons.

Specifications
Maximum Dimensions:

13.5 x 7.25 x 4.5 in.
34.3 x 18.4 x 11.4 cm

Probe:

304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction

Enclosure Material:

Polypropylene Blend, Stainless Steel and Aluminum.

Batteries:

2 AA Alkaline; Battery Life of approximately
200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.

Temperature:

Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements

 

 

 



您最近瀏覽的商品

美國泰亞賽褔
北京pk10开奖记录排期 青海快3今天开奖 现在gta5单机怎么赚钱 金牌二人麻将下载 北京pk赛车官网开奖 刺激战场体验服官网 pk10计划在线网页版 功夫万条筒玩法 游争霸出孙悟空预兆 11选5开奖结果 数码产品实体店赚钱吗 时时彩首页 电子盆栽怎么玩